Solid brake pedal??

XPETEX · Mar 4, 2012

Hi,
This is my first post on here,
im running a landy 90 with a 200TDI engine dropped in with almost 300,000 miles on the clock. when running the brake pedal feels fine but when you turn it off it goes hard is this usual?
cheers Pete

The Mad Hat Man · Mar 4, 2012

XPETEX · Mar 4, 2012

also how come stuff I type in connects to flea bay? don't get it...

XPETEX · Mar 4, 2012

cool Thank you muchly

GRATCH · Mar 4, 2012

If you have a brake servo, then yes.

XPETEX · Mar 4, 2012

ok
never had it on any car I have owned is it sprung loaded?

blue beasty · Mar 4, 2012

when yer injun int running then yer servo don't work

XPETEX · Mar 4, 2012

yeah I know that bit, normally the pedal should go hard on every vehicle if you pump it but on myn when you turn it off the pedal goes solid straight away, then once started drops to where it normally sits just seems a bit odd

lynall · Mar 5, 2012

Check the non return valve in the rubber hose from vac pump to servo, i think its built into the 90 degree fitting servo end.

Lynall

Solid brake pedal??

XPETEX

New Member

The Mad Hat Man

Well-Known Member

XPETEX

New Member

XPETEX

New Member

GRATCH

HUGE MEMBER

XPETEX

New Member

blue beasty

Leaks an prone to bits dropping off

XPETEX

New Member

lynall

Well-Known Member

Similar threads