Sill
- Thread starter David1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 11,023
- Location
- North of the Wall
What's it off? My Defender 90 does not look like that. Is the rubber a door seal?
- Posts
- 11,023
- Location
- North of the Wall
These pictures aren't great
inner sill Which is a U shaped channel in cross section
outer sill which is a more or less a flat panel with 6mm lip around it.
inner sill Which is a U shaped channel in cross section
outer sill which is a more or less a flat panel with 6mm lip around it.
YRM Metal solutions sell the lip you refer to. I just purchased 2 and new seals. You are correct it has several holes in it and just rivets on.
Discokids
Well-Known Member
- Posts
- 3,160
- Location
- Derbyshire
Are these seals different on newer models? I would like to somehow fit a seal to the doors of mine, rather than the frame, so it doesn't get damaged so easily.
Flossie
Well-Known Member
- Posts
- 10,971
- Location
- Shropshire
I think I dumped those rusty bits on mine ?
Fitted the later seal that attaches to the door..
I can take a PIC but it will have to be tomorrow morn cos its dark now.
Shout up if you do!
Fitted the later seal that attaches to the door..
I can take a PIC but it will have to be tomorrow morn cos its dark now.
Shout up if you do!
Flossie
Well-Known Member
- Posts
- 10,971
- Location
- Shropshire
This is my off side second row door, front is the same thing but the ground was muddy by the front door so couldnt kneel there. They are held on with pop rivits.
The other pic shows the sill area with no trace of the old style seal and retainer.
The other pic shows the sill area with no trace of the old style seal and retainer.
