Shock absorber rubbers..

Codbasher · Sep 9, 2007

Noticed that my shocks are moving quite freely on the rubber grommets, in on side has almost gone completely, shocks aint leaking etc so should be good.

In my infinate wisdom I bought a set of shock grommets from e bay, BUT they seem to come in 2 halves slightly cone shaped, is this normal, and do you just slot one in each side of shock etc....

Advice please...

London to Brighton getting closer............

slob · Sep 9, 2007

yes, one each side and tighten the nut up. or put the split pin in depending which set up yer got.. if its the nut dint over do it or yule fook the rubbers.
if its the split pin you'll need some kind of clamp to compress the rubber enough to get the pin through.

Codbasher · Sep 9, 2007

Cheers mate, was thinking along those lines...

Guess something like a valve spring compresser would do the trick as I have split pins....

slob · Sep 9, 2007

sometimes you can stick yer pin in, long bit nearest the shock, the turn it using mole grips or the like, then tap it through wiff yer hammer

Codbasher · Sep 9, 2007

Club hammer will do then?

Shock absorber rubbers..

Codbasher

New Member

slob

Well-Known Member

Codbasher

New Member

slob

Well-Known Member

Codbasher

New Member

Similar threads