SERIOUS mates got cancer! need HELP!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
oil dripper

oil dripper

Well-Known Member
Posts
5,659
Location
Here i think
:( right here goes,got a dilemma.last year me mate fought like hell having chemmo and radio therapy to get shut of the cancer.. initially he was told it was a success....but its back and he is now skin an bone and wasting away.his motor is a 2.5 na 110,the poor bugger cannot even drive it because the clutch is now to heavy for him to depress.

so a few questions spring to mind after talking with his missus.

Is it feasible to fit an auto box in it?if so which one and how hard is it to do?

Or is there anything i can do to make the clutch pedal lighter for him?

he loves his motor and its a shame he cannot use it as he used to any help and suggestions will be welcomed
 

Attachments

  • Picture 010.jpg
    Picture 010.jpg
    54.6 KB · Views: 115
No problem fitting a in-line servo in the clutch fluid line, but tricky to get the right servo.

It works nicely - very light pedal.

CharlesY
 
seems good sean cheers. i,ll have a good look at that later
i seem to recall something being done with a servo but i cannot remember what it was on mate.
heard of it being done on a series motor but cant find anything on it
 
CharlesY said:
No problem fitting a in-line servo in the clutch fluid line, but tricky to get the right servo.

It works nicely - very light pedal.

CharlesY
Click to expand...
i,ll have to have a good look and do some head scratching,do you know anyone with any piccies?
its gotta be done asap as when i take him to New cross monday we aint expecting good news
 
only person i know who's actually done it is on a Cobra, and you'd not learn anything relivant to a LR - apparently it's actualy a very simple install and that the Lucas one give a 1:90 boost

Pirtek or simillar would be helpfull as i'm sure the pipe fittings would be incompatable
 
Sean said:
only person i know who's actually done it is on a Cobra, and you'd not learn anything relivant to a LR - apparently it's actualy a very simple install and that the Lucas one give a 1:90 boost

Pirtek or simillar would be helpfull as i'm sure the fitting would be incompatable
Click to expand...

time to get the tape measure out and see what can be made to fit,cause his brake servo is bloody huge(ex un motor),might afta source a remote one as i think it needs to be done sooner than later
 
Sean said:
from memory the lockhead servo is about half the size of the mor eusual LR ones
Click to expand...
cheers for that.gonna have a look at the disability site later as well and weigh all the options up after he as been to see the consultant next week,work the finances out for him etc.
 
You must log in or register to reply here.

Similar threads

tweedandbriar
*** Injector Adjusters Stuck - Help Needed ***
2
Replies
28
Views
1K
Tim4x4
Tim4x4
tweedandbriar
A bit jumpy in low revs...
Replies
5
Views
545
dag019
dag019
Skolmate
Defender 200tdi LT77 noise and rebuild
Replies
13
Views
855
dag019
dag019
P
Hi peeps
Replies
2
Views
607
steve2286w
steve2286w
1
Help...2.5na cyl head needed
Replies
4
Views
628
1Madmonkey
1
Back
Top