series111 high box not working/engaging

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

rottymad

New Member
Posts
4
Location
derby
hi guys new to the site so here goes,just brought a series111 1971, problem is it wount engage high box, low box is fine so is high box with 4wd engaged but just high box nothing just like its in neutral,had floor pannels up cleaned and lubed all the leavers nothing its like something is stopping it from engaging. theres very little between neutral and what should be high box engaging any suggestions as ive never had this problem befor
thanks
 
If it works in 4wd High, probably rear half shaft, diff if you're unlucky.
 
a friend of mine had the same thing on his the guy that fixed it said the rover axle fitted to the swb was much weaker than the salsbury and had a tendancy to strip the splines if u got it stuck in the mud and gave it a bit of welly to get it out about 20 quid for a new half shaft and it was sorted
 
cheers guys rh half shaft snapped,something the guy forgot to tell me,problem when buying non runners i guess,at least i can get it sorted now
 
we had this before, Yella - these are mine - yours are still int Dibnah!:D

anyroadup - halfshafts once owned by Yella and MHM - must be worth a cupple of undred in rarity and quality value?
 
create a fred in the anything goes section - asking fur carriers from hamshire to Derby - see if anyonr volunteers.

there is a guy wot goes from Essex to Manchester - he mite be prepared to drop em orf - if we can get them from here to essex.
 
trunkneck said:
a friend of mine had the same thing on his the guy that fixed it said the rover axle fitted to the swb was much weaker than the salsbury and had a tendancy to strip the splines if u got it stuck in the mud and gave it a bit of welly to get it out about 20 quid for a new half shaft and it was sorted
Click to expand...
I agree they're weaker than a Salisbury, a bit like saying a rhino is lighter than an elepahant, still wouldn't want it to sit on me.
I've never ehard of a series halfshaft striping splines (but I'm sure someone here has & proves me wrong) but they do snap. I've been driving Series motors since '75 (longer if you include Army ones) and I've snapped 3. One was getting shed loads of abuse, the other two snapped on the road.
For the record I've also done one diff (careless driving whilst towing) and 2 front shafts (both driver abuse) so I wouldn't call them weak.
 
ive owned a landy for 3 months been round the block in it twice and was just passing on what the bloke said
 
You must log in or register to reply here.

Similar threads

P
L322 TD6 lost all drive
Replies
5
Views
485
backinblack
backinblack
Military Mobility
Help identifying high pitched whine
Replies
12
Views
2K
lynall
L
Military Mobility
Help needed identifying high pitched whine
Replies
2
Views
1K
Military Mobility
Military Mobility
G
Land Rover 300tdi clutch not disengaging after engine out
Replies
8
Views
3K
miktdish
miktdish
19_Hue_95
Lost all drive (and my own drive)
Replies
11
Views
1K
Brown
Brown
Back
Top