Series 2 Landie with Series 3 Gearbox
- Thread starter Will11
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
I would suggest using nuts and spanners to install the gearbox rather than trying to slap it.
Even a gearbox doesn't like that sort of treatment.
Trench Rat
Well-Known Member
- Posts
- 2,865
- Location
- Near some excellent trees
I thought the same thing when i got my 2a. I just got used to a non-synchro gearbox.
Unless it's due to yours not having a gearbox at all?
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
From memory, the Series 2a gearbox has synchromesh on all gears except first anyway.
Trench Rat
Well-Known Member
- Posts
- 2,865
- Location
- Near some excellent trees
it's on 3rd/4th. 1 and 2 don't
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
OK, second as well. It is about 17 years since I had a 2a.
I don't remember the lack of synchro being any hardship to drive, though.
Trench Rat
Well-Known Member
- Posts
- 2,865
- Location
- Near some excellent trees
Oh i totally agree. After a short while you get used to downshifts and matching the engine/gearbox speed. It's daunting at first when you have gone from driving a 1.2L petrol ****box from 17-23 but you get it pretty quickly.
Trench Rat
Well-Known Member
- Posts
- 2,865
- Location
- Near some excellent trees
How long have you been driving? You're 17, passed yet?
I don't think you'll have any problem as long as you practice and take it slow. You'll get it quick.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
you either fit the pipe work and slave cylinder from a series 3 and remove the earlier type or swap the bell housing on a 3 box to that of a 2a,suffix e 2a boxes were full synchro too
Trench Rat
Well-Known Member
- Posts
- 2,865
- Location
- Near some excellent trees
E? So before F or am i getting confused on old plates. Mine isn't synchro and is suffix F as well as never having had the headlamps on the radiator panel only ever on wings, someone on here said it still had genuine military wings of the year. So i'm all confused about mine. Even says 1968 on the nice little bronze plate thingy down by the transfer lever.
Don't want to hijack the thread, just confused.
Been driving for 3 months, just odd bits and experience before I go for my test. A bit off topic looked at getting insured on it and for some reason they wouldn't insure me until I was 18. I think that was with Classic Line, any recommendations?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
g/boxes on 2as only go up to e then its series 3 which the first are the same as the last 2a e
Trench Rat
Well-Known Member
- Posts
- 2,865
- Location
- Near some excellent trees
So you’re saying that a 1968 2a should have full synchro..?
I’m with admiral and I got the discount despite the high mileage I put on for the year (very hopeful. Done less than a tenth of that) and not being garaged.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
You could try Adrian Flux, but they tend to be quite expensive. Or Google Academy Insurance in Egham, Surrey, and give them a ring.
Extreedoc
Well-Known Member
- Posts
- 505
- Location
- Leicestershire
Are you and Will getting confused with registration letters? Gearbox suffixes are nothing to do with reg letters. When Land Rover improved a gearbox they gave it a different suffix letter after the gearbox number stamped on the 'box itself.
Nothing to do with registration letters: 'E' 1967, 'G' 1968 etc...
Trench Rat
Well-Known Member
- Posts
- 2,865
- Location
- Near some excellent trees
ah okay thanks.
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
Mines a 1970 with a Sufix F gearbox
