selector free wheeling hubs,Info.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wickford90

wickford90

Well-Known Member
Posts
3,623
Location
wickford essex
i have just removed the above to clean and refurb, one of the springs is damaged and a retaining wire is broken are spares available my search has been fruitless, any pointers to a diagram ( my memory is not as good as i thought ) as i want to make sure it goes back together correctly, also are they a bolt on with out any other mods as they are going on to a different axles.
 
Finished the refurb and paint, I'm so good i even have a washer and O ring over from each one, now got to arse about and try and suss out where they go. Any one got a diagram/info?

 
wickford90 said:
thanks, it was only a good clean up and some paint, doubt i,ll do a thread maybe when its done i will put up some pics of what i done.
Click to expand...

Did you change the gasket between the selectro and hub? Mine are leaking oil like a baddun and wondered where to get them from.
 
darius said:
Did you change the gasket between the selectro and hub? Mine are leaking oil like a baddun and wondered where to get them from.
Click to expand...

Not put them back on yet, as one of the springs that engages the cog is broken trying to figure out how to repair it, but will use a liquid gasket tiger seal maybe, was reading on an old thread and james martin mentioned a sealant, will have to go back and search what it was.
 
wickford90 said:
Not put them back on yet, as one of the springs that engages the cog is broken trying to figure out how to repair it, but will use a liquid gasket tiger seal maybe, was reading on an old thread and james martin mentioned a sealant, will have to go back and search what it was.
Click to expand...

Thanks

Took the old boy round the block today and it sounds dry, think it's left its lube on the driveway
 
blackstrat said:
:hysterically_laughi I'm sorry but..
Click to expand...

A thoroughly sensible thread and all you see is innuendo. Good god man grow up.
Psssst. wanna buy a blinding black Tele with white binding black scratch plate, now I've moved not got room for them all, just sold me Les Paul that was hard enough but seeing me Tele go will be gut wrenching.
 
wickford90 said:
A thoroughly sensible thread and all you see is innuendo. Good god man grow up.
Psssst. wanna buy a blinding black Tele with white binding black scratch plate, now I've moved not got room for them all, just sold me Les Paul that was hard enough but seeing me Tele go will be gut wrenching.
Click to expand...
Ahem yes sorry about that it's the company I keep :)

I know it's picky but I don't care for the binding on Teles, I am looking for a Firebird if you have one...?
 
blackstrat said:
Ahem yes sorry about that it's the company I keep :)

I know it's picky but I don't care for the binding on Teles, I am looking for a Firebird if you have one...?
Click to expand...

Sorry no Firebird, the Tele is the last one i need to sell. just leaves me with an Ovation acoustic and two guitars I built a Tele and an arch top I can't sell them.
How can you not like this?

 
You must log in or register to reply here.

Similar threads

Forgotthelandinggear
Free wheeling hubs stuck
Replies
6
Views
1K
Forgotthelandinggear
Forgotthelandinggear
O
Series 3 AVM free wheeling hubs
Replies
16
Views
3K
Botswana-Mike
B
D
Solex 361V Carb
Replies
3
Views
1K
Diggerat35
D
R
L322 thermostat housing help
Replies
6
Views
410
roythebus
R
D90 Td5
Aftermarket Hubs
Replies
3
Views
595
D90 Td5
D90 Td5
Back
Top