sedimenter bypass tank end join
- Thread starter mr glee
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Derby7889
Active Member
- Posts
- 202
- Location
- Derbyshire
Yea, someone broke the drain plug on mine and glued it back on for athsetic purposes :|
I got the pipes off the head unit, with some stilsons, but apparently no one sells the pipe fixtures I need to put it all back together so i ran a new pipe in from the tank to the lift pump on my 200TDI.
If you are just bipassing it though, you should be able just to cut the pipe and put a section of larger pipe over the top of the joint and put the jubilee clips at either side of the joint you have put in....if that makes sence.
I got the pipes off the head unit, with some stilsons, but apparently no one sells the pipe fixtures I need to put it all back together so i ran a new pipe in from the tank to the lift pump on my 200TDI.
If you are just bipassing it though, you should be able just to cut the pipe and put a section of larger pipe over the top of the joint and put the jubilee clips at either side of the joint you have put in....if that makes sence.
Derby7889
Active Member
- Posts
- 202
- Location
- Derbyshire
Yea, you would only need a small joining piece if you joined the in and out pipes together.
haigy
Well-Known Member
- Posts
- 1,277
- Location
- Crewe cheshire
8mm rubber pipe. 2 jubilee clips.
Cut the pipe at 1 side of sedimeter and slide pipe over. Then same on other side. Jobs a good un.
Dont forget then to twist the sedimeter bowl and try to snap it off as it will leak fuel and make rear wheel slip.
When you cut pipe you wont lose much diesel so dont worry bout catchin it till you remove sedimeter from chassis
Cut the pipe at 1 side of sedimeter and slide pipe over. Then same on other side. Jobs a good un.
Dont forget then to twist the sedimeter bowl and try to snap it off as it will leak fuel and make rear wheel slip.
When you cut pipe you wont lose much diesel so dont worry bout catchin it till you remove sedimeter from chassis
ronsealdeath
Sagging Member
- Posts
- 1,851
- Location
- Swansea, Wales
I bought a pipe joining piece from ebay, 2 clips and your away.
MrMayze
Active Member
- Posts
- 289
- Location
- Cheshire West
Can't you just unbolt the whole thing? Mine came loose when I changed the top shock mount.
haigy
Well-Known Member
- Posts
- 1,277
- Location
- Crewe cheshire
Its connected to the shock mount bolts 17mm i think front and back then itl just come off
Similar threads
