seat belts for S3 pickup

please can anyone tell me if i can fit inertia reel seat belts in a s3 pick 1982. its got static ones but with high back seats which pull forward becasue the top mounting is below the seat back?
thank Jon

I put them in mine when i had it.

SEC500/30 Intertia Lap and Diagonal Belt for outer front seats of Series hardtop vehicles.

You also need top corner brackets, part no's are on that page.

Paul D said:

I put them in mine when i had it.

SEC500/30 Intertia Lap and Diagonal Belt for outer front seats of Series hardtop vehicles.

You also need top corner brackets, part no's are on that page.

Click to expand...

Not sure those will fit a truck-cab.
Exmoor trim do one where the inertia reel bolts on top of the centre bulkhead.

i am not sure if that seat belt set in paddock will fit either. It says hard top. The reason i asked about the seat belts was there seems to be a lack of any place to put the top bracket above the shoulder.
I think the corner brackets are for the interia reel bit at elbow height.
jon

OK, sorry, I didn't read it fully.

I do (now) remember having to modify the bracket a tad, but can't remember how!. It fitted mine, whether I used it with the Truck Cab or Hardtop!

Must be honest though, it was a few years ago, so the actual parts and numbers may have changed, I just looked at Paddocks website as I know that's where I got them from 'cos I used to live only a few miles from Matlock and Paddocks.

Maybe you need a fabricated bracket, might be worth seeing what a local independant might have or come up with. How do newer Defender truck cabs have their belts fitted? Might be a chance to modify or even use as is an anchorage point from them?