Freelander 2 (LR2) Seat Belt Beep

Landy-Max · Aug 17, 2017

My god its annoying - I understand why it is there.
But it chimes in a nano-second.

Which is a pain because I don't put a seat belt on till I get to the end of the drive because of a gate.

Anyway.

In the Lotus - I just unplugged a switch / connector under the seat to sto pthe beep but keep the light on the dash.
Is there an easy way of doing this for the Freelander? (no I don't want to but a clip in the hole!)

Or is it an A*seache.

Landy-Max · Aug 17, 2017

PS: I know about the 10x clicks way of stopping it - but really - I'm not doing that

Nodge68 · Aug 17, 2017

Lotus-Max said:
PS: I know about the 10x clicks way of stopping it - but really - I'm not doing that

That's the only way to stop the initial chime.That was the first thing I did when I got my D3.
You'll still get the seatbelt when moving chime as far as I know.

You can't unplug the buckle sensor as it will flag a fault.

It could be worse. Our Kuga has belt sensors for all 5 seats and chimes when any are unbuckled.

Landy-Max · Aug 17, 2017

Landy-Max · Aug 17, 2017

Hang on a minute. Does the 10 clicks thing stop it forever - or does it need doing each trip?

Nodge68 · Aug 17, 2017

Lotus-Max said:
Hang on a minute. Does the 10 clicks thing stop it forever - or does it need doing each trip?

It stops the ignition on belt warning only. I don't believe you can stop the belt warning while in motion. It didn't on my D3 anyway. An advanced diagnostic tool might stop it though. I'd give Gap Diagnostics an email to ask if there IID will do it.

Landy-Max · Aug 17, 2017

Thx Bud - I'll give it a go.

Freelander 2 (LR2) Seat Belt Beep

Landy-Max

Active Member

Landy-Max

Active Member

Nodge68

Well-Known Member

Landy-Max

Active Member

Landy-Max

Active Member

Nodge68

Well-Known Member

Landy-Max

Active Member

Similar threads