RSW EAS free version problem commination with car

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

dubloman

Member
Posts
82
Location
UK
Hi

I bet this subject has been chatted to death but I can't find my exact problem.

I have used the software before with this equipment successfully I understand how to get it to communicate with the car.

I have connected it the correct way and pressed initialise to then get this.
20241213_144705(1).jpg

I'm getting intermittent status readings that flicker green but mainly stays red.

Anybody got an idea on how to resolve this issue.

I'm running windows 10 with the obd2 to usb lead.

It has worked before but my car is on its arse and I've used the jump wire to get some air into the system and it's taken it from don't drive over 35 mph message to EAS Fault.

Please help

Thanks
 
has windows updated itself ? With the cable connected, remove the windows usb-serial driver. Then unplug cable, and install the correct FTDI driver. Then try again. It needs to have "good idle" after initialise, or the data reveived is rubbish.
 
Windows updated prior to me connecting it to the car.

How will I remove the windows usb-serial driver. Where will i find the correct FTDI driver.

Sorry to be thick ...... lol
 
You must log in or register to reply here.

Similar threads

M
Whats happened to Storey Wilson RSW Solutions
Replies
5
Views
421
mousemat
M
K
Is my RR Classic in EAS shutdown?
Replies
12
Views
981
kevleaper
K
feyniriel
P38 EAS problems
Replies
18
Views
1K
pwood999
pwood999
Montyjohn
P38A Adding a valve to manually fill EAS tank and why did my pump fail again?
Replies
14
Views
1K
Datatek
Datatek
Flossie
P38A Eas issues
2
Replies
22
Views
1K
Datatek
Datatek
Back
Top