Khryztal
New Member
- Posts
- 725
- Location
- Felcourt. Surrey
Evening all,
I hope everyone has had a good bank holiday.
Ok I am having problems with my ABS system on my RRC 3.9. I have changed the booster block after having a some problems the other week. I have bled the system completly 4 times now using over 20 litres of dot 4. Pump takes 54 seconds to pressurize the system. And you can push the pedal (with moderate effort) to the floor. Brakes do work but not as well as they did.
Got a load of air out on the first bleed but nothing on consecutive bleeds. And time for pump to ramp up has not changed nor has pedal travel decreased. Any got any ideas?
Also there are no fault codes up. All electrics are known good.
I hope everyone has had a good bank holiday.
Ok I am having problems with my ABS system on my RRC 3.9. I have changed the booster block after having a some problems the other week. I have bled the system completly 4 times now using over 20 litres of dot 4. Pump takes 54 seconds to pressurize the system. And you can push the pedal (with moderate effort) to the floor. Brakes do work but not as well as they did.
Got a load of air out on the first bleed but nothing on consecutive bleeds. And time for pump to ramp up has not changed nor has pedal travel decreased. Any got any ideas?
Also there are no fault codes up. All electrics are known good.
