Replacement 1/4 rear chassis

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
archwayanimal

archwayanimal

Active Member
Posts
184
Location
Oxfordshire
Assume this is a dumb question - need a new 1/4 rear chassis for a 2003 D2 - found one which has 900mm extensions rather than 600mm - does that just mean the “arms” are longer and therefore can replace more of the rusty bits?!
 
Last edited:
Yes.
Just be sure that 900mm is enough !
I ended up going with a 1400 mm section & was glad I did when we cut off the rusty section which was remarkably dire even around the damper mountings which you'd imagine were a "high point" on the chassis & therefore not so prone to water staying inside rotting the steel away !
 
You must log in or register to reply here.

Similar threads

archwayanimal
Rear bumper
Replies
4
Views
606
Stanleysteamer
Stanleysteamer
D
Disco 2 1/2 chassis replacement.
Replies
19
Views
2K
Daviehilltown
D
S
Disco 2 2004 D2 rear airbag recommendation
Replies
5
Views
507
sierrafery
sierrafery
Neptune1922
Disco 2 At the moment following a new chassis on Feb 1st I now have quiescent problem.
Replies
7
Views
852
Neptune1922
Neptune1922
FlatbedPilot
Disco 2 Discovery 2 Replacement Steering Box.
Replies
3
Views
1K
Andy Warren
Andy Warren
Back
Top