Hi all, went to remote unlock car and all opens except the two front doors. i eventually got in by using key and opened the passenger door by internal door handle. I have read that the door remote actuators become jamed but what are the chances of both doors failing at the same time? Any one got ant ideas is there a known wire fault etc. Any help most welcomed.
remote locking
- Thread starter landmark
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sierrafery
Well-Known Member
- Posts
- 17,872
- Location
- Arad/Romania
put your ear near the actuator and see if you hear something on fob unlock command on both doors... if no sound the problem could be from the IDM, but if you hear sounds then IMO the actuators are gone... 99.9% of cases the unlock fails first ... it's weird but not impossible for them to fail at the same time....think back, did the car suffer a shock or something?
sierrafery
Well-Known Member
- Posts
- 17,872
- Location
- Arad/Romania
IDM(intelligent driver module) ...it's integrated in the internal fusebox...the actuators are getting feed through it's electronic micro-relays, it used to have water ingress/corrosion on the plugs
as long as the fob works on the other doors nanocom will not help you much...did you listen as i said? ...no click or other sound at the actuator while unlocking?
as long as the fob works on the other doors nanocom will not help you much...did you listen as i said? ...no click or other sound at the actuator while unlocking?
Ryder
Having a senior moment
- Posts
- 6,616
- Location
- West Bedforshire
No point having an intelligent driver module on LZ! There's no intelligent drivers!
Similar threads
Disco 4 (LR4)
Faulty remote locking and unlocking
