muddythelandy
New Member
- Posts
- 775
Anyone else start a loving caring rebuild then have an overwhelming urge to scrap the fugging barstading heap of shoite?
Chassis so knakered it bent on my axle stands and swallowed up the stand (ok I knew it was knacked when I bought it)
EVERY SINGLE bolt rusted solid.
If there are 10 bolts doing the same thing, each is a different size.
wiring "loom" engineered with masking tape
EVERY single panel crumbling to white dust wherever it meets the rusty chassis or meets another panel. Tub, knackered, seat box knackered, wings knackered, doors knackerd.
Still on a positive note the engine and boxes don't leak too much.
Going to attack it with an angle grinder tomorrow. Or a sledge hammer.
Bastrading thing
Chassis so knakered it bent on my axle stands and swallowed up the stand (ok I knew it was knacked when I bought it)
EVERY SINGLE bolt rusted solid.
If there are 10 bolts doing the same thing, each is a different size.
wiring "loom" engineered with masking tape
EVERY single panel crumbling to white dust wherever it meets the rusty chassis or meets another panel. Tub, knackered, seat box knackered, wings knackered, doors knackerd.
Still on a positive note the engine and boxes don't leak too much.
Going to attack it with an angle grinder tomorrow. Or a sledge hammer.
Bastrading thing
