Rear wiper ,

Rockape40 said:

Hi all , does anyone have measurements for the position and hole size of the rear wiper motor please , I want to fit one but the new door came without the wiper shaft hole .
Cheers

Click to expand...

dag019 said:

I should be able to get some for you tomorrow as I bought a rear door at Newbury on Sunday that I am about to take the wiper out of! I drilled a hole on for one on my old rear door. From memory you need some holes and some rivnuts on in the frame as well to support the motor. But I will get you some pics and measures tomorrow.

Click to expand...

dag019 said:

I should be able to get some for you tomorrow as I bought a rear door at Newbury on Sunday that I am about to take the wiper out of! I drilled a hole on for one on my old rear door. From memory you need some holes and some rivnuts on in the frame as well to support the motor. But I will get you some pics and measures tomorrow.

Click to expand...

Rockape40 said:

Hi Dag019 ,
Any joy with the dimensions and sizes for the rear wiper please

Click to expand...

dag019 said:

Apologies for the delay. Grommet hole is for the wiper spindle. The bolt is the rivnut to prevent the motor turning.

If you require any more or specific measurements let me know as I have the blank door atm.



View attachment 338894

View attachment 338895

View attachment 338896

View attachment 338897

Click to expand...

Rockape40 said:

That is great thanks , my rear door is blank also so with these details I will cot the hole and fit the rivnut , I feel I can crack on now , I'm not sure if the wiper came with the grommets but I should be able to get some easy enough , many thanks for all your efforts , much appreciated

Click to expand...

dag019 said:

Should have said as well the little hole to the right of the bolt had a self tapper through it with the earths on the loom attached. I know when I rebuilt my rear door I replaced this with a Small bolt.

Click to expand...