Rear tub removal on high capacity 110

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hi how easy is it to remove the rear tub on a high capacity 110 pickup???
Any tips please
Cheers
I've done a 90, not a 110.
Obviously, it's quite an involved job. Why do you want to take it off?
EDIT
Actually, it'll be more straightforward than I first thought because the seat belt mounts won't go through the front of the tub, I reckon.
Might just be a case of removing wiring harness to rear lights. Unbolting at the lugs on the rear cross member and however it's bolted to chassis behind the cab and to out riggers. I'm not familiar enough with that layout though :rolleyes:
 
Last edited:
Easy.....
As above remove loom(all behind O/S rear lights)
Bolts to chassis across rear member & just behind the truck cab bulkhead
You need to remove the fuel tank pipe & breather from the tank.as you will struggle to move of the filler tube

Then get a few people to give you help as they are heavy.
 
Just had a look at mine
Here’s the brackets you need to undo & fuel pipes.
Shout if you need any further info

B0A785ED-498E-4990-9ED0-CDE5C767BF06.jpeg
654BD38F-BB98-4326-8A89-19A2C566A479.jpeg
8E2C1C0F-D9C4-4F5F-B793-574999EF88EB.jpeg
 
Back
Top