Re-coding of ABS Module after repacement

A lot of used ABS modules on ebay like this https://www.ebay.com/itm/325634430706 have
following texts:

EBCM will require initialization to your vehicle and IS NOT plug and play
Module requires programming to the vehicle at this point.


So... how re-programming is done and what tools are required? I have All Comms III but not sure it is sufficient.

For which car ?

2005 RR HSE US version. The intended replacement module has the same part number- 0 265 950 056

This thread says it does need coding:
https://www.landyzone.co.uk/land-rover/abs-module-coding.374401/

This thread says it doesn't:
https://www.landyzone.co.uk/land-rover/05-abs-pump-module-sorted.368934/

This thread seems to explain how:
https://www.fullfatrr.com/forum/topic49957.html

If it contains things like VIN, wheel sizes, etc. then it might need it ? . . . . . . . . . but then I have no idea & no intention of getting an L322 !!

You will need a gap tool to recode for that car

biketeacherdave said:

You will need a gap tool to recode for that car

Click to expand...

Only GAP tool? Nothing else will work?

Apart from main dealer stuff I'm not aware of anything else I'm sure someone else will come along with a suggestion.
If your gonna own 1 of these invest in a gap tool.

biketeacherdave said:

Apart from main dealer stuff I'm not aware of anything else I'm sure someone else will come along with a suggestion.
If your gonna own 1 of these invest in a gap tool.

Click to expand...

Understood. I already have All Comms III. Considering that I already spent on repars $13000 in just 2 years, and don't plan to keep vehicle more than 3 years - I plan to keep my expenses as low as reasonable possible. That's why I am getting parts from Ebay and asking questions.

A 2nd hand gap tool will.pay for its self the first time you use it as it does everything you need and more