Range Rover 2005

shaneannigans · Jun 1, 2021

Hi all, just got a 2005 3.o td6
Just had a fault check and he can not clear some, but can not find anything on these on the net, hoping someone could point me in the right direction to fix these problems.

Thanks Shane

kermit_rr · Jun 1, 2021

What actual issues are presenting? Is the battery good and fully charged?

gold rover · Jun 1, 2021

As Kermit said. Also once battery checked, clear faults, take for a run and see which come back.

shaneannigans · Jun 1, 2021

kermit_rr said:
What actual issues are presenting? Is the battery good and fully charged?

Yes it's good and fully charged

shaneannigans · Jun 1, 2021

gold rover said:
As Kermit said. Also once battery checked, clear faults, take for a run and see which come back.

I will try tomorrow on my way to work
Thank you for your help

shaneannigans · Jun 1, 2021

kermit_rr said:
What actual issues are presenting? Is the battery good and fully charged?

The Ride height won't lower on motorway.
Power steering is hevey was told could be to do with air suspension?

gold rover · Jun 1, 2021

shaneannigans said:
The Ride height won't lower on motorway.
Power steering is hevey was told could be to do with air suspension?

Ah now see , that's pertinent information. Again check battery is fully charged. Do the power steering reset. Check if light comes on PAS control. Check you haven't locked it in position. Check all four corners are sitting straight. Then do run and check diagnostics

shaneannigans · Jun 1, 2021

gold rover said:
Ah now see , that's pertinent information. Again check battery is fully charged. Do the power steering reset. Check if light comes on PAS control. Check you haven't locked it in position. Check all four corners are sitting straight. Then do run and check diagnostics

Ok thanks for the help I will try tomorrow,

shaneannigans · Jun 1, 2021

Just found one of thr faults that wont clear not a problem. The driver utility module is another name for the companion camera

shaneannigans · Jun 1, 2021

Is a body processor module the same as a body control module?

brianp38dse · Jun 1, 2021

What diag is it your using as quite a few do not work well on range rovers.

shaneannigans · Jun 1, 2021

brianp38dse said:
What diag is it your using as quite a few do not work well on range rovers.

No sure it's my brothers

gold rover · Jun 1, 2021

shaneannigans said:
Just found one of thr faults that wont clear not a problem. The driver utility module is another name for the companion camera

I might be imagining this but the L322 in her first appearance may not have had the camera. I believe that comes in to play in her second dress. Is your veh a changeover model? What trim is she?

shaneannigans · Jun 1, 2021

gold rover said:
I might be imagining this but the L322 in her first appearance may not have had the camera. I believe that comes in to play in her second dress. Is your veh a changeover model? What trim is she?

It's just on the change over has touch screen system the camera is for when you use a trailer.

gold rover · Jun 1, 2021

shaneannigans said:
It's just on the change over has touch screen system the camera is for when you use a trailer.

Then you have me confused. @Saint.V8 is probably the only one to unconfuse me . Touch screen is 'normally' the 3.6 not 3.0.
It is very kind of you to tell me what the camera is for, I had no idea.

shaneannigans · Jun 2, 2021

Up date on my Rr issues
So done the battery discussions/steering reset, went for a drive and still the same,
If I change the BCM is it a plug and play or do I need to get it coded to my RR?

Thanks Shane

brianp38dse · Jun 2, 2021

Most of the ecu`s on an l322 have to be programmed to the car
Have a look at the bmw inpa software its a free down load just need cable and works with the early cars , if you have an l322 you need your own diag it will save you a lot of time and money

gold rover · Jun 2, 2021

brianp38dse said:
Most of the ecu`s on an l322 have to be programmed to the car
Have a look at the bmw inpa software its a free down load just need cable and works with the early cars , if you have an l322 you need your own diag it will save you a lot of time and money

This might be an issue. It appears to be a 2005 with some 2006 bits. So probably depends how 'early' and what is first gen and what is second gen.

backinblack · Jun 2, 2021

Afaik there are only 2 camera's, a venture cam, and a reversing cam. Mine is a 2005 TD6 with touch screen and venture cam but no reversing cam. I don't see any errors relating to a non fitted camera on my diag tool so maybe you have a faulty one, or it's been removed

gold rover · Jun 2, 2021

backinblack said:
Afaik there are only 2 camera's, a venture cam, and a reversing cam. Mine is a 2005 TD6 with touch screen and venture cam but no reversing cam. I don't see any errors relating to a non fitted camera on my diag tool so maybe you have a faulty one, or it's been removed

Just out of curiosity, does the 2005 Td6 , with touch screen, also have the round control on console? Or does it only have some bits for the changeover ?

Range Rover 2005

Member

Very

Well-Known Member

Member

Member

Member

Well-Known Member

Member

Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads