Propshaft advice

ciderman · Dec 4, 2011

Hi
what prop goes from a stage one front axle to a LT77 fitted to a perkins 4236?
standard defender or 90-? mine has a lot of play.....
length is 720mm.

pobby · Dec 5, 2011

It would depend on where the flanges have ended up ?
Has it got the standard series transfer box or the lt77 transfer
This will dictate the distance between the did flange and the gearbox flange then you can work out what prop

ciderman · Dec 8, 2011

ah, that is a question, i don't know. how do i tell the difference, i have a series 3 one under the bench, so what differences do i look for?
yrs

jamesmartin · Dec 8, 2011

length as the diff flanges are all the same

ciderman · Dec 8, 2011

OK, don't know if i want to go and look now its blowing a gale or two!

blue beasty · Dec 8, 2011

4236........is that the 3.3? if so I've got a new water pump you can have.....not that it helps with your prop issue :doh:

Propshaft advice

ciderman

Active Member

pobby

New Member

ciderman

Active Member

jamesmartin

Well-Known Member

ciderman

Active Member

blue beasty

Leaks an prone to bits dropping off

Similar threads