Prop shaft

Hi everyone,

I'm currently doing the prop shaft bearings, everything was going well until I got the silver washers that go over the splines before you attach the bearing.....

The silver washers is "supposed to push fit over"" but whichever way I try it just doesn't seem to over the splines, I have triple checked against the old ones and they are the same size.
Am I missing something or are these really difficult to fit?

Any advice would be amazing please

Hi,

Can't help with why they don't fit but here's a great How To
/Chris

Chris_68 said:

Hi,

Can't help with why they don't fit but here's a great How To

Freelander 1 - Freelander 1 VCU Bearing Replacement - How To Guide

Updated 13 August 2017. Please can you vote in my poll >>> What Freelander have you got poll This write-up shows the steps I took to change the Viscous Coupling Unit (VCU) support bearings on my 2001 Freelander 1 v6. The front bearing failed. The solution was to remove the viscous coupling and...

www.landyzone.co.uk

/Chris

Click to expand...

Hi Chris_68, I've been following this guide but unfortunately I just can't get the washer to go over the splines for some reason, I've checked them against the old ones and they are the same. I'm hoping someone has experienced this before and can help

Hi, sorry it wasn’t if any help.
I will replace my bearings this weekend so if not sooner I can try to help then.