Problem with Injector Bleed off lines ~HELP~PLEASE

Just wondering(Hoping) if anyone can help,, Ive got a sheared bolt on the fuel bleed off lines that daisy chain across from injector to injector before returning back to the fuel filter on my 1987 landrover 90 2.5 td.The bolt is sheared where it runs from the 4th injector up to the filter.It looks like a 180 degree double banjo bolt,,does anybody no where I can buy this part or the full set up from injection pump to fuel filter.....Your advice is much appreciated.....

Ayup,

I thought I knew which piece of pipe you were referring to, and then you mentioned the injection pump line so I'm not quite sure which fuel line you are on about!

If you mean the pipe which runs from the injectors back up to the banjo nut at the top of the fuel filter housing, this pipe comes as a whole brit part set which is round about £6. The set has the banjo nut (which screws into the top of the fuel filter housing), the length of pipe to the injector bleed (with the locking nut) and also a length of pipe from the banjo back to the fuel tank (also return) all of which are already attached to the banjo nut, ready to plumb in. I had to heat up and cut off the banjo nut to fuel tank pipe because I couldn't e arsed re-plumbing all of that, and was left with just the banjo to injector run off.

Try paddocks Paddock Spares - Land Rover, Range Rover Parts & Accessories - Discovery, Defender and Freelander

-Pos

Yes thats the pipe work Im reffering to,,Think I confused myself slightly when writing the thread.Ive tried paddocks but cant seem to find the part,,...

Britpart - The Quality Parts for Land Rovers - Locate a Dealer If you know where your local landy specialist or Britpart dealer is you'll be fine!

Thanks for your advice,,I emailed famousfour.co.uk yesterday and got a reply today telling me they have what im after,,,,,Thanks again

No prob.