Prices added to websites....

As requested by members of this group when i first posted the address of my
new website I have now added some example prices to the pages.
Look at www.motorsport-plumbing.co.uk

I have also added a SPECIAL OFFER page to the usual website.
Have a look at www.llama4x4.co.uk


Many thanks

David
LLAMA 4x4

On Tue, 15 Mar 2005 21:32:39 -0000, "David_LLAMA4x4"
<[email protected]> wrote:

> As requested by members of this group when i first posted the address of my
>new website I have now added some example prices to the pages.
> Look at www.motorsport-plumbing.co.uk

You havent added any prices for the silicon hoses yet!

If turbo sized ones are only available in simple bends how would you
recommend joining multiple bends together to make a more complex pipe?

"Tom Woods" <[email protected]> wrote in message
news:[email protected]...
> On Tue, 15 Mar 2005 21:32:39 -0000, "David_LLAMA4x4"
> <[email protected]> wrote:
>
> > As requested by members of this group when i first posted the address of
my
> >new website I have now added some example prices to the pages.
> > Look at www.motorsport-plumbing.co.uk
>
> You havent added any prices for the silicon hoses yet!
>
> If turbo sized ones are only available in simple bends how would you
> recommend joining multiple bends together to make a more complex pipe?
>

The silicone bits vary wildly in price from peanuts to loads of dosh
depending on size / angle. Your average 'turbo' size 90' bend is about £15 I
suppose.

The best way to make a turbo hose is to use as few elbows as possible and
to make up the distances with solid ( metal / plastic ) tube - as is done on
most production vehicles if you look.

Aluminium joiners are available with rolled beads on the ends to help
sealing but at turbo pressure just a straight cut off pipe and a decent
wormclip will hold the pressure with no leaks.

David
LLAMA 4x4