power to dash/fuse box

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

RustyDefender

Well-Known Member
Posts
577
Location
Lake District
hey guys, doing a m57 swap on a previous 200tdi chassis / loom (round plugs)

just went to crank it over and forgot there's no power going to the fuse/dash.. what cable/colour should i be looking for and what location to hook up a 12v supply from the starter?

Thanks in advance
 
hey guys, doing a m57 swap on a previous 200tdi chassis / loom (round plugs)

just went to crank it over and forgot there's no power going to the fuse/dash.. what cable/colour should i be looking for and what location to hook up a 12v supply from the starter?

Thanks in advance
It should be a fairly large brown wire with a ring terminal (originally attached to the starter) which would come out of the centre of the bulkhead and then go to the passenger side of the engine. I am not sure which side the starter is on for the M57, but you want it to pick up power from the batter cable attached to the solenoid on the starter.
 
Back
Top