power steering
- Thread starter slimworx
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discomania
Well-Known Member
- Posts
- 6,947
Yes - what engine do you have?
You need a pump, and a PAS box and pipes; its not a big job.
You need a pump, and a PAS box and pipes; its not a big job.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,088
- Location
- Kernow - Near England
and a fluid reservoir, and mounting brackets for the pump and reservoir and a replacement (double belt) bottom pulley.
It aint a small job eeva.
It aint a small job eeva.
discomania
Well-Known Member
- Posts
- 6,947
Ah was trying to help him out - ease him into the idea... then give him the rest of it...
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
i have a pump and a disco res for a few beer tokens 
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
make me an offer
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
50p
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
i got a cheaper alternative - use your arms more.
There are few (some, but few) excuses for power steering. At least thats how i see it anyway
There are few (some, but few) excuses for power steering. At least thats how i see it anyway
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
:brick:
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
May have a pas box as well and a bottom pulley if someone has a single grove one you can exchange it with.
pm me
pm me
nickliv
Active Member
- Posts
- 113
- Location
- Aberdeenshire
It's a straightforward swop with a 200 TDi disco PAS setup, bolt off / bolt on, the drop arm will need changing. (I've just done this today. - Took me about 2 hours)
As you've got a TD, get hold of a rotten disco, and transplant the engine at the same time. I've just done this also, but it did take a number of days.
As you've got a TD, get hold of a rotten disco, and transplant the engine at the same time. I've just done this also, but it did take a number of days.
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
