Power steering, noisy?
- Thread starter nobber
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
What fittings on your pump? There are a couple of types, I had a TD PAS setup on my 2.5na and I switched the whole lot over to the TDi engine I fitted with no issue - my pump has the bango type fittings
It's the old type, union screw connection on one pipe and hose with jubilee clip on the rear of the pump, from memory. Box is the one with 5 or 6 bolts, can't remember, the one with the most bolts! I retro fitted all this over a decade ago, think it came from. 110.
Iirc 19j and 200 tdi pas pump are the most expensive ones, they are also crap as the shaft front support bearing does not run in the pas oil like the disco versions.
I have had two shafts snap, both times bearings shagged, all because of the offroading I was doing.
I have had two shafts snap, both times bearings shagged, all because of the offroading I was doing.
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
Is it possible to fit the disco pump? My pump is progressively getting more noisy/leaky to
I dont think so as the drive shaft is quite a bit shorter.
A google of images should give you an idea.
They may have even come down in price since I last bought one, which was about 5 yearsa go.
