trevauk
New Member
- Posts
- 9
- Location
- Measham, North West Leicestershire
Hi All
I have a 1988 3.5 EFI Auto RRC.
This morning I went to put the Rangie into reverse and nothing happened, then back into drive and again nothing, just free revs. I switched off and re-started and bingo all was well. This also happened a couple of weeks ago. That time as well, switching off and re-starting also solved the problem.
I also seem to have another, maybe connected, problem. I cannot move the transfer stick from high to low. I have tried this today in nuetral at a standstill and also slightly moving forward. The lever will not move up to go in low.
I am not very mechanical but would an inkling as to what might be going on and the seriosness level.
Hopefully someone might be able to push me in the right direction.
Thanks
Treva.
I have a 1988 3.5 EFI Auto RRC.
This morning I went to put the Rangie into reverse and nothing happened, then back into drive and again nothing, just free revs. I switched off and re-started and bingo all was well. This also happened a couple of weeks ago. That time as well, switching off and re-starting also solved the problem.
I also seem to have another, maybe connected, problem. I cannot move the transfer stick from high to low. I have tried this today in nuetral at a standstill and also slightly moving forward. The lever will not move up to go in low.
I am not very mechanical but would an inkling as to what might be going on and the seriosness level.
Hopefully someone might be able to push me in the right direction.
Thanks
Treva.
