Please help power stering belt snaped on me today!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

Delta351

New Member
Posts
26
Location
Fareham
HI all my power stering belt went on me today, i have the rave cd but just can't find the diag to show me the way it go's on could any one point me in the right direction please.:confused:
 
I know a picture speaks a thousand words but I don't have a picture so here goes:

On my 4.6L I have 7 pullies including the the tensioner. Starting from the crank pully and working clockwise:-

Belt comes from underneath crank pully and round the outside of the tensioner, over the top of the altenator. It then goes under the waterpump pully before going over the top of the power steering pump and air con pullies. Finally it comes round over the top inside of the final pully which should leave you back at the crank.

I suggest that you draw your pullies on a piece of paper then try to transcribe my notes on the paper. That might make it more understandable.

Hope it works.
 
jt_armstrong said:
I know a picture speaks a thousand words but I don't have a picture so here goes:

On my 4.6L I have 7 pullies including the the tensioner. Starting from the crank pully and working clockwise:-

Belt comes from underneath crank pully and round the outside of the tensioner, over the top of the altenator. It then goes under the waterpump pully before going over the top of the power steering pump and air con pullies. Finally it comes round over the top inside of the final pully which should leave you back at the crank.

I suggest that you draw your pullies on a piece of paper then try to transcribe my notes on the paper. That might make it more understandable.

Hope it works.
Click to expand...

Thank you very much thats perfect
 
You must log in or register to reply here.

Similar threads

Lex Myster
Freelander 2 TD4 Timing Belt
Replies
4
Views
449
Stanleysteamer
Stanleysteamer
awkwardbob
L322 Fuel Gauge Callibration
Replies
0
Views
636
awkwardbob
awkwardbob
M
Help Required Please. 1992 2.5Tdi 90 High Reving on start " Won't Idle"
Replies
8
Views
532
kevstar
kevstar
C
Smiths gauge bulb holder
Replies
2
Views
445
aj1954
aj1954
M
Sport ACE bypass for RR Sport 4.2 Petrol SC
Replies
10
Views
1K
mikesavva
M
Back
Top