Plans for the weekend ?

Jonnyb1990 · Jul 24, 2014

prop shaft bits turned up today, all I need now is grease,

(rubber coupling for rear and gaiter for front)

What you guys got going on ?

Andy74 · Jul 24, 2014

Fiddling with swivel shims if it's not ****ing down

gstuart · Jul 24, 2014

sorting out the condense drain pipe

easye1 · Jul 24, 2014

must admit its down to the weather what I do..
I`ve got a better steering columb shaft to swop over,
the rear sunroof to cut out and seal with stainless sheet,

or 2 tons of concrete to mix and lay,
or feckall if its too hot...

drove down our coast road today looking at the beaches and sea...

its packed now, weekend it`ll be rammed with tourists, and why not, its the sunshine coast..

harry2012 · Jul 24, 2014

Grease the props, check my swivel play after fitting a new swivel a few days ago.

Jonnyb1990 · Jul 24, 2014

add front brake pads to the list of things to do

THEengineer · Jul 24, 2014

getting the 110 ready for its m.o.t on tuesday

blackstrat · Jul 24, 2014

Laning trip organised for Sunday

..only it's a bit of a ploy to try to persuade a mechanic mate of mine into working on my 90 for me as all my tools, jacks, stands etc are in storage

channi · Jul 25, 2014

sort out the main beam on my head lights as i have none on the passenger side and no spots

greyhair · Jul 25, 2014

Rebuild the front calipers, calipers have been powder coated and all new stainless pistons MMM YUMMY

OxonLandy · Jul 25, 2014

channi said:
sort out the main beam on my head lights as i have none on the passenger side and no spots

same here. let me know how you get on...

aaronmorris · Jul 25, 2014

greyhair said:
Rebuild the front calipers, calipers have been powder coated and all new stainless pistons MMM YUMMY

Posh bugger

Nowt wrong with a lick of paint

Stonesinboots · Jul 26, 2014

Paddle boarding, first time, then on the ....... drink

channi · Jul 26, 2014

OxonLandy said:
same here. let me know how you get on...

all done luckily just a fuse and replace a crusty old spot lamp relay, happy dayzz

next on the to do list, order new bump stops n fit

cornish rattler · Jul 27, 2014

Screwing my front reg plate to the n/s air vent flap

Jonnyb1990 · Jul 27, 2014

Rear prop done, front gaiter prop havent attempted till i get some grease for it,

Front Offside wheel well sound proofing came off today, cut that off, arches look like they might need welding in the next year or two,

All in all, done feck all lol

Pikey · Jul 27, 2014

Done feck all but eat & drink as got Minty's daughter & parents down for 5days.

Oh tell a lie we did go & buy Daughter a pikey wagin, for when she comes darn sarf!! to live with us. Very nice it is too.. Bought a Tripod BBQ, on Saturday & had a cracking BBQ last night..

Jonnyb1990 · Jul 27, 2014

Good luck with that Pikey !!!

cornish rattler · Jul 28, 2014

Oh i mite fit my new extended prop shaft grease nipples i bought at billing aswell as my grease gun won't go anywhere near the front UJ's unless i remove the prop first so hopefully these will sort this now

cornish rattler · Jul 29, 2014

Noticed yesterday that my n/s/r wheel is covered in oil so at the weekend i will check the breather to see if its blocked and if it isn't i was planning to refurbing the axle's anyway so will sort it then

Plans for the weekend ?

Well-Known Member

Member

D3 Grandad

Banned

Active Member

Well-Known Member

whatever

Well-Known Member

Active Member

Well-Known Member

Active Member

Head's a shed

Active Member

Active Member

Well-Known Member

Well-Known Member

Dummy Ejection Facilitator..

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads