I recently purchased a beautiful, low mileage 2011 5L s/c Autobiography which came with the Park Heating - Park Heating With Remote Control [043AV] option. However, when I operate the remote near the car, while the LED on the remote flashes red for a second or so, as far as I can tell nothing happens inside the car. According to the owners manual, if the remote "Flashes green or red for two seconds when the on or off buttons are pressed, to indicate that the signal was not received". The battery in the remote seems OK when I checked it with a multimeter.
To be honest, I am not even sure what should happen if the system was working properly as the owners handbook provides no information - is it the cabin heating and/or windscreen heater that should be turned on or what? I had a look at the Settings in the car touch screen but the only option which I thought could be relevant related to setting times for the heating to go on and off automatically and there was nothing there to do with operating the system manually with the remote.
Any thoughts on what could be wrong and how to fix it would be appreciated.
Cheers.
H
To be honest, I am not even sure what should happen if the system was working properly as the owners handbook provides no information - is it the cabin heating and/or windscreen heater that should be turned on or what? I had a look at the Settings in the car touch screen but the only option which I thought could be relevant related to setting times for the heating to go on and off automatically and there was nothing there to do with operating the system manually with the remote.
Any thoughts on what could be wrong and how to fix it would be appreciated.
Cheers.
H