P38 Snorkel

aollaku · May 30, 2014

Hi folks. Where can i find a P38 snorkle???

wammers · May 30, 2014

As far as i know you can't. Putting a P38 through anything remotely deeper than it's recommended slow wade height is asking for lots and lots of problems.

martynv8 · May 30, 2014

You may need a good waterproof bag for the BECM

aollaku · May 30, 2014

ok

and any tools to move the becm from under seat

StuckAgainSteve · May 30, 2014

P38s and water do not mix. Hence the lack of snorkels.

Datatek · May 30, 2014

aollaku said:
Hi folks. Where can i find a P38 snorkle???

ound::hysterically_laughi

ound:

blackstrat · May 30, 2014

You'd be safer giving it a 36" suspension lift

Datatek · May 30, 2014

Look at 996 turbo's site, I thiink it's www.rangerover-revolution.com or something like that.

wil2813 · May 30, 2014

snorkel pour range rover P38 - YouTube

or

http://www.youtube.com/watch?v=_cafHEKuNCw

Stufer · May 30, 2014

aollaku said:
ok and any tools to move the becm from under seat

Sledgehammer. Not the Peter Gabriel one.

We're err not being very helpful are we

tomcat59alan · May 30, 2014

aollaku said:
ok and any tools to move the becm from under seat

10 mil socket when you have remover the trim and the seat, and lots of wire the extend the connections.

mutsnutz · May 30, 2014

this is the only p38 snorkel available on ebay built for p38 and its feckin hideous or you could buy a 200 tdi one and modify it to fit

Grrrrrr · May 31, 2014

Follow Datatek to 996Turbo's Range Rover Evolution website. He's in France but people over here stock his parts (although often cheaper to order direct.)

Talk to Rick-The-Pick about moving your BECM up into the roof at the back.

Probably cheaper just to get an older Defender to play offroad in?

TCubed · May 31, 2014

He might want it for sand in fairness

Datatek · Jun 1, 2014

TCubed said:
He might want it for sand in fairness

Why would you want a snorkel for sand? A bigger surface area filter maybe and a repositioned intake but can't see the need for a snorkel unless you are planning to submerge in sand

aollaku · Jun 1, 2014

Now if i remove the becm from that positions where is now, and put in another place i can use for wadin with a snorkel i think. Not only the BECm but even the transmitions and air system ecu, and all the other thinks that are in the bottom of the seat..

Datatek · Jun 1, 2014

aollaku said:
Now if i remove the becm from that positions where is now, and put in another place i can use for wadin with a snorkel i think. Not only the BECm but even the transmitions and air system ecu, and all the other thinks that are in the bottom of the seat..

Auto, transfer & EAS ECU would also need to be relocated.

aollaku · Jun 1, 2014

yes... then is a real off road landy

tomcat59alan · Jun 1, 2014

aollaku said:
Now if i remove the becm from that positions where is now, and put in another place i can use for wadin with a snorkel i think. Not only the BECm but even the transmitions and air system ecu, and all the other thinks that are in the bottom of the seat..

better putting axles on the roof and turning it on it's head

TCubed · Jun 1, 2014

Datatek said:
Why would you want a snorkel for sand? A bigger surface area filter maybe and a repositioned intake but can't see the need for a snorkel unless you are planning to submerge in sand

Can't you have a rear facing snorkel for sand to reduce the amount of sand/dust going into the filter?

P38 Snorkel

Active Member

No longer with us, RIP

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Technician, Bodgit & Scarper Ltd

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Similar threads