P38 Rustproofing

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

desertrover

New Member
Posts
77
Evenin' all!
Any of you fellas had any experience of rustproofing companies/products?.....I'm looking to get my new beastie waxoyled & undersealed.....any experiences/advice/recommendations would be much appreciated!
Thanks.
 
In my opinion, this is as long as a piece of elastic !!
If there is rust already present, it needs to be treated first, there is no "Miracle" cure. As most people know, it will still rust from below the paint/coating unless it's neutralised.
We then come to safety specific items such as brake and fuel lines, which if already corroded are a hazard and should be replaced prior to treatment instead of being simply painted over. Waxoyl is o.k. provided it's applied to sound material, don't expect it to restore rusted material to as new condition. Just remember that any rust present will eat away from underneath the paint/protective coat unless it's removed and treated before the coating is applied. The coating may delay the appearance of rust for a while but will not eliminate it.
 
There used to be a crowd in Newbury I think, that did a two part epoxy underseal with a guarantee. From memory, it was pricey, took at least a day but they supplied a courtesy car.
Not sure of any feedback from users.
 
desertrover said:
Evenin' all!
Any of you fellas had any experience of rustproofing companies/products?.....I'm looking to get my new beastie waxoyled & undersealed.....any experiences/advice/recommendations would be much appreciated!
Thanks.
Click to expand...
all my vehicles get a coat of black waxoyl mixed 70/30 with hydraulic oil , the hydraulic oil really creeps into seems and hard to get places and remains totaly flexable and slightly tacky , as we all know wipe oil off a part where its been leaking and more often than not it will look like new
you dont wana be painting/undersealing over rust as it will continue to rust underneath
 
Thanks for your opinions chaps, I take your point about arresting any active corrosion before applying a protective layer. I was wondering if anyone has had any specialist outfits like Ziebart or similar do a professional job on their cars?....I've heard of all sorts of weird and wonderful "witches brews" for painting and squirting on, but I'd like to have a good, professional job done by "expurts" with the right spray/injection gear and have some sort of warranty attached. Corrosion protection, particularly on older vehicles is a bit of a black-art!
Cheers,
 
I'm in the process of doing this myself...lots of wire brushing! :rolleyes:
A good coating of kurust and then just brushing on hammerite waxoyl.

Can imagine paying someone else to do it properly will be a costly job!
 
Yuss!....just had a price orf an outfit in Hatfield for the thick end of 500 quid. They seem to be geared up for it though & they are sole agents for Waxoyl in UK. A bit more than I waz expectin....but when its the woman ewe luv....no price is too much Eh!??
 
Irishrover said:
There used to be a crowd in Newbury I think, that did a two part epoxy underseal with a guarantee. From memory, it was pricey, took at least a day but they supplied a courtesy car.
Not sure of any feedback from users.
Click to expand...

there called before and after mate and there in rugby warwickshire now
 
You must log in or register to reply here.

Similar threads

cjbroaders
L322 Rusty Sills (2006 L322) Repair Yorkshire
Replies
0
Views
263
cjbroaders
cjbroaders
A
P38A Head Gasket Kit & ARP Bolts ?
Replies
15
Views
356
enjoi
enjoi
p38DH
P38A Diagnostic device
Replies
8
Views
535
p38DH
p38DH
I
L322 Sill Repair/Replacement
Replies
3
Views
913
nevillen
nevillen
J
How expensive ?…..really
2 3
Replies
44
Views
2K
Grrrrrr
Grrrrrr
Back
Top