Soggybite3
Member
- Posts
- 34
- Location
- Ireland
Which relay is for the glowplugs and which for fuel pump on a 99 P38 diesel
P38 relays
- Thread starter Soggybite3
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Flossie
Well-Known Member
- Posts
- 10,958
- Location
- Shropshire
Pump one front of fuse box, glow plug is in the ecu box behind the battery I believe.
Datatek
Well-Known Member
- Posts
- 44,835
- Location
- Near Poitiers SW France
The pump relay is indicated on the underside of the fuse box lid.
Soggybite3
Member
- Posts
- 34
- Location
- Ireland
Relay 12 and fuse 39 to be precise. For the fuel pump must still find one for Glowplugs. Anyone know why the P38 had different inlet minifolds. Had 3 1999 jeeps and 2 had Alu ones and 1 had a plastic one
- Posts
- 12,606
- Location
- Sud ouest France !
No idea what the jeeps had but the early p38 aluminium manifold was a none EGR valve and the later plastic manifold had an EGR valve. 
Datatek
Well-Known Member
- Posts
- 44,835
- Location
- Near Poitiers SW France
Glow plug relay is in the ECU box behind the battery.
Soggybite3
Member
- Posts
- 34
- Location
- Ireland
Thanks all
- Posts
- 19,284
- Location
- Buckinghamshire, UK. ('95 DT)
No idea what the jeeps had but the early p38 aluminium manifold was a none EGR valve and the later plastic manifold had an EGR valve.
Switched over around 1997. I think they also moved the studs on the head around.
Soggybite3
Member
- Posts
- 34
- Location
- Ireland
Not quite sure about that as my 1 99 model had plastic. The other 99 had alu and my 00 had alu
Datatek
Well-Known Member
- Posts
- 44,835
- Location
- Near Poitiers SW France
The alloy manifold was never fitted to 99 or 00 model years so if yours had alloy, it's likely the heads had been replaced at some time with heads from an earlier year after head failure.
