P28 Cv gaiter clip popping off
- Thread starter cpa
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
If they buggered it up "TAKE IT BACK" and make a big fuss, LOUDLY then the will fix it
- Posts
- 58,170
- Location
- Preston Lancs.
Not really. But they would need to remove the drive shaft to do the ball joints. CV and drive shaft come out and go back as one unit. Unless they have been heavy handed hard to see how they have damaged CV boot clip. But if it didn't come off easily before they worked on it it should not come off easily now.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
The clips go together with a special tool or you can use pincers
Rangie Disco Sportsman
Active Member
- Posts
- 114
- Location
- Somerset
Big strong cable tie and use pair of pliers to pull it uber tight whilst pushing on the little plastic block it feeds through hard with a flat screwdriver and it'll probably hold. The proper stainless steel bands can be hard work to get sufficiently tight without the proper tools.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
I used pincers. Think a cable tie might be a bit thick?
