Disco 2 P/s pipe change

Hi all, just starting to change the p/s pipes (amongst other bits).
Do I have to remove the radiator/intercooler/auto g/box oil cooler ? Many thanks in advance.

Hi Andy, I just changed the lower pipe that runs from the reservoir by the air filter & down by the sump where it had rubbed through ( in no part due to Land rovers wisdom of using a bit of foam to keep that from happening ) & it was quite easy to do if that was the one you meant ?

Hi @Royston 90 good to hear from you.
The pipes I needed to change were the pair that run under the radiator(s) one from the power steering pump to steering box & ir's mate from the reservoir to the steering box. I think the one you mean is the other one from reservoir to p/s pump which as you say is very straightforward compared to the major strip down to fit the others.
Hope you're keeping well, all the best.

Andy Warren said:

Hi @Royston 90 good to hear from you.
The pipes I needed to change were the pair that run under the radiator(s) one from the power steering pump to steering box & ir's mate from the reservoir to the steering box. I think the one you mean is the other one from reservoir to p/s pump which as you say is very straightforward compared to the major strip down to fit the others.
Hope you're keeping well, all the best.

Click to expand...

Yes keeping well. I realise the pipe you mean now. I have a fun job to do next & that is to replace the intermediate uk on steering shaft. I had liberally sprayed wd40 & gave the female Torx bolt head a couple of knocks before going in with the nut runner & stripped the splines. So now when I do get enough time I need to change that before it goes for an mot

Anyway I`ve not had the pleasure of that job yet so can`t offer any helpful insight, but I hope you get it sorted.