Earl the Black Lab
New Member
- Posts
- 6
- Location
- Cambridgeshire
Afternoon all
Freelander 2, 5 door 2012 model
I've replaced the whole window unit as the cables were ruined and the motor burnt out.
Replaced and working but when I do the window up it hits the emergency limit and drops again...when the window is open there's still approx 150mm of window showing so the yellow and white window clips are not sitting at the correct height.There seems a lot of pressure on them to manually try and move them to the correct position.
Is there a little hidden release button to move them or another way to reset them??
I've tried the window reset by holding the button up for a couple of seconds that I found whilst searching but no luck.
Cheers in advance
Freelander 2, 5 door 2012 model
I've replaced the whole window unit as the cables were ruined and the motor burnt out.
Replaced and working but when I do the window up it hits the emergency limit and drops again...when the window is open there's still approx 150mm of window showing so the yellow and white window clips are not sitting at the correct height.There seems a lot of pressure on them to manually try and move them to the correct position.
Is there a little hidden release button to move them or another way to reset them??
I've tried the window reset by holding the button up for a couple of seconds that I found whilst searching but no luck.
Cheers in advance
Last edited:
