Mine is a white valve that plugs into the servo body, looks to be held in with a rubber grommet, it leaks, not the valve, the rubber grommet, is this replaceable or is it a new servo time? I believe its a type 80 servo, valve top left. 1985 90.
One way valve on servo?
- Thread starter nobber
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
Mine leaked there when i wiggled the white thing. I got a new valve from somewhere iirc.
servo cracked at the mount bolts A few weeks later
servo cracked at the mount bolts A few weeks later
Mine leaked there when i wiggled the white thing. I got a new valve from somewhere iirc.
servo cracked at the mount bolts A few weeks later
That sounds about right, show them some love and they just take advantage!
A bit of ptfe gas tape around the grommet then a bit more round the valve when you push it in worked for me.
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
Scooby22
Well-Known Member
- Posts
- 1,244
- Location
- County Durham
Spotted a servo NRV on ebay for £7.23, if you dont mind paying £74 postage. (There are lots more.)
Do not buy this one
https://www.ebay.co.uk/itm/Land-Rover-Brake-Vacuum-Pump-Non-Return-Valve-Part-STC493-/184377608617
Rimmer Bro' sell them for £7.95 including postage.
Do not buy this one
https://www.ebay.co.uk/itm/Land-Rover-Brake-Vacuum-Pump-Non-Return-Valve-Part-STC493-/184377608617
Rimmer Bro' sell them for £7.95 including postage.
Last edited:
Similar threads
