oil pressure light

S

spartan

Member

Posts

53

• Apr 7, 2011

• #1

anyone go any ideas, the oil pressure light as started to come on, on my 2.25 petrol engine. it comes on intermittedley when the engine as been running for a while usually when its revving higher. the engine is a reconditioned military engine, thats done less than a thousand miles, i have changed the oil pressure sender, thinking it might be something simple, no joy there.

atb

 

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• Apr 7, 2011

• #2

is it a military engine youve had reconned or military reconned ,as a lot of military recons around are there rejects some rightly some not

 

S

spartan

Member

Posts

53

• Apr 7, 2011

• #3

the engine was bought ready recond from the military, i took it all apart when i had it, to check the work had been done. and everything looked good, the engine runs as sweet as a nut, no knocks rattles ect, it does not use any oil or water, it very strange why this as started to happen

 

D

DrWatson

New Member

Posts

61

• Apr 7, 2011

• #4

spartan said:

the engine was bought ready recond from the military, i took it all apart when i had it, to check the work had been done. and everything looked good, the engine runs as sweet as a nut, no knocks rattles ect, it does not use any oil or water, it very strange why this as started to happen

Click to expand...

To be safe Id buy an aftermarket oil gauge and fit it. That way you can check if the oil pressure is sufficient at higher revs. If the readings are low or very inconsistent Id be looking at your oil pump pronto. Dr.

 

steve2286w

Well-Known Member

Posts

4,505

Location

monkeyangerland

• Apr 7, 2011

• #5

As the doctor recommended, i got an oil pressure gauge off ebay nice smiths one 52mm dia i think , it sits in the series 3 dash nicely (holes are there waiting)
I also had a look at the pump changed the pressure relief spring and plunger which was a bit worn, get about 50-60psi running but drop s low when idling which is normal

these are the bits i ordered, the tee piece fits into sender unit hole , then the sender and feed for gauge come out of it, gives great peace of mind when the oil light flickers!



Speedograph Richfield Ltd, Classic Automotive OnlineThank you, payment for your order has been accepted. Item NameQuantityPriceTotalTPR Oil Pressure Gauge Tee Piece1£4.40£4.40Oil Pipeline adaptor OA1£2.00£2.00Oil Pipeline OLN05-AA1£5.50£5.50 Subtotal£11.90Shipping is United KingdomShipping£3.15 Tax£2.26Payment method is 'PayPal Express'Currency is British PoundTotal£17.31

 

S

spartan

Member

Posts

53

• Apr 19, 2011

• #6

just an update, ive fitted a oil pressure gauge, and its got plenty of pressure, the strange part is i fitted 3 new senders into the top of the oil filter housing and got a flickering oil pressure light, i fabricated a tee piece so i could check the pressure when the light came on, and guess what the light as not come on since,what difference fitting a tee piece makes who knows, but never mind panic over.

 

TheKeymeister

Active Member

Posts

772

Location

Lincolnshire

• Apr 20, 2011

• #7

Same happened to my mate, kept getting a flickering oil pressure light and it eventually stayed on and only cleared under load. Fitted a new sensor, no problems ever since.