oil filters

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
90truckcab

90truckcab

Well-Known Member
Posts
4,739
Location
staffordshire
have posted this before, kind of, am after a spin on filter housing ther bout £40, made by rocky mountain etc, they replace the cartridge type and big bowl on a series 2 petrol, to use standard car spin on filters

but are series 3's fitted with spin on filters to start with ? if so am off down the breakers one day .

secondly , i want a gear stick, whats the difference between a series 2 and series 3 gear stick? or am i as well still using my repaired one !

cheers
 
No pics, its 1963 but who knows the year of anything else that is attached to it! Unless I am completely wrong of course but I seem to remember it being a normal type spin on filter!
 
All Series 4 cylinder had tyhe cartridge type filter, but the 110/90s have spin on. I beleieve the housing is a straight swap
 
Gear sticks fall apart for fun, they break just at the pivot ball, Right as your on a busy intersection or on a roundabout!!. ive repaired mine with a welder and its strong as ever...
How is your gear stick repaired?
 
Davec said:
All Series 4 cylinder had tyhe cartridge type filter, but the 110/90s have spin on. I beleieve the housing is a straight swap
Click to expand...


agreed, i kno the series all have cartridges, so a spin on from the breakers ( off a 90 /110) will do the job nicely? same fitting to block i presume, my 90 looks the same,

cheers
 
Unsprung Hero said:
If you're off to the breakers might be worth looking out for a dead LDV 350 or 400 with the Rover engine. Fittings should be the same and there are plenty of dead ones around.
Click to expand...

Just wondering what year LDV 350/400's should I look out for,,, from what year to what year were the rover engines in these vehicles,, looked at quite a few recently but they were fitted with the peugeot engines. eagerly awaiting your reply:)
 
Last edited:
bowers1986 said:
Just wondering what year LDV 350/400's should I look out for,,, from what year to what year were the rover engines in these vehicles,, looked at quite a few recently but they were fitted with the peugeot engines. eagerly awaiting your reply:)
Click to expand...

what engine is this ? - it's in a R plate LDV

DSCF0252.jpg


DSCF0253.jpg
 
90truckcab said:
yup, what yer doin with it ? was it the one from yer bargain van !
Click to expand...

it's me mates van, just thought i might be able to help him get rid

it's still stood where it's been for the last couple of years - looking like this i am not surprised - it's lowering the value of all the house sup the other end of the village

DSCF0256.jpg
 
You must log in or register to reply here.

Similar threads

PopPops
Disco 2 TD5 Mahle oil filter
Replies
4
Views
319
PopPops
PopPops
B
Restored 1972 Series 2 Diesel not starting
Replies
16
Views
574
Shedload
S
IDK...
What primer do i use on aluminium
2
Replies
33
Views
5K
dag019
dag019
Y
Another series III brake fail wiring harness question.
Replies
7
Views
646
steve2286w
steve2286w
Moorhouse2
Oil Filter Conversion to Spin On
Replies
11
Views
2K
Gord Wedman
G
Back
Top