New Wheels
- Thread starter fodlegbob
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
Looks like a good tidy vehicle you've got there.
Wot tyres are they, and wot pressures are you running them at?
Do't want to sound paranoid but if you post pics of your vehicle I'd obscure the No plate, Just cos your not paranoid it doesn't mean they're not out to get you!
Wot tyres are they, and wot pressures are you running them at?
Do't want to sound paranoid but if you post pics of your vehicle I'd obscure the No plate, Just cos your not paranoid it doesn't mean they're not out to get you!
Cheers Grunt, I've blurred my plates as suggested.
They're Bronco Grizzly Claws. I've heard some mixed reports on these, but I figured they were worth a pop seeing as I got them cheap.
Not sure on the pressures yet. Any suggestions? They're 235/85.16's
They're Bronco Grizzly Claws. I've heard some mixed reports on these, but I figured they were worth a pop seeing as I got them cheap.
Not sure on the pressures yet. Any suggestions? They're 235/85.16's
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
When I got my Bronco Roughriders, which are s'posed to be a copy of grizzly claws I ran them a 40psi. But after reading some posts on here, reduced them to 35psi and couldn't realy feel any difference. Last weekend I was having a general look at them and it looked as if the outer edges were wearing faster then the middles so I've put them back to 40psi. If I'm offroading I'll reduce them to 30psi and pump them up when I get back home.
