Series 3 My S3 project

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Jules59

Jules59

Member
Posts
45
Location
Warwickshire
I took ownership of this abandoned project. It had been standing, partly dis-assembled for a couple of years. SWB S3 2.25 diesel NA (not actually in the vehicle), galvanised chassis, parabolic springs, twin fuel tanks. Was a petrol originally but thta had been replaced with the diesel years ago. Most of the bit and pieces were in boxes inside the load space.
This is how she looked on arrival - not too bad
S3 (01a)(Large).jpg

Footwells needed some work, but bulkhead was pretty sound (compared to many others Ive seen)
S3 (11) (Large).jpg


S3 (19) (Large).jpg


S3 (32) (Large).jpg

This is where Im up to now. Got to sort the the brakes, tune the diesel (that'll be fun ) and put the body together and tidy up the wiring.
S3 (48) (Large).jpg

Hope you find the pics interesting. I know its not like the amazing restorations you see on this forum but its something that I can take my time over and do bits to it when I feel like it.
 
Two years further on and this project is almost finished.
The wiring was a mess and several things turned out to be missing. All that is sorted now except that I have no seat belts for it. I assume that they are not easy to source now.
Anyone know where I could get some seat belts (passenger and driver) for an 1982 series 3 soft top?
 
Jules59 said:
Two years further on and this project is almost finished.
The wiring was a mess and several things turned out to be missing. All that is sorted now except that I have no seat belts for it. I assume that they are not easy to source now.
Anyone know where I could get some seat belts (passenger and driver) for an 1982 series 3 soft top?
Click to expand...

They should be similar to most BL cars of the era, Mini, Austin 1100, Morris Marina and so forth ...

It'll be the anchor points you may have to fabricate brackets and floor / chassis load spreaders for ...
 
I took it out for the first time today. Just around my next door neighbour's field for a test.
I'm delighted to say the engine started first time and the irregular idle and smoke has disappeared. I actually think it was a sticky valve which had freed itself. Everything worked which was nice. Gave the parabolic springs a bit of exercise as the field was rock hard.
Still a few more things to sort - cover needs some rope, seat belts, a door keeps opening by itself, heater to be re-fitted, and a bit of a general tidy up. But I'm very happy with the way it ran.
I've mislaid the brackets for the front valance too,
S3 (Large).jpg
 

Attachments

  • IMG_20210906_123901458_HDR.jpg
    IMG_20210906_123901458_HDR.jpg
    505.6 KB · Views: 95
Jules59 said:
I took it out for the first time today. Just around my next door neighbour's field for a test.
I'm delighted to say the engine started first time and the irregular idle and smoke has disappeared. I actually think it was a sticky valve which had freed itself. Everything worked which was nice. Gave the parabolic springs a bit of exercise as the field was rock hard.
Still a few more things to sort - cover needs some rope, seat belts, a door keeps opening by itself, heater to be re-fitted, and a bit of a general tidy up. But I'm very happy with the way it ran.
I've mislaid the brackets for the front valance too,
View attachment 247438
Click to expand...

Very smart well done. :):)
 
You must log in or register to reply here.

Similar threads

T
2,5 NA to 2,25 Petrol
Replies
15
Views
1K
ThomasLRNL
T
F
Bulkhead Identification
Replies
4
Views
782
Wildefalcon
W
lightning
Drove a Series 3 today
2
Replies
31
Views
2K
lightning
lightning
B
127 Rapier FFR unfinished project for sale
2
Replies
21
Views
4K
Beddo
B
E~FENDER
Electric 110 Project
2 3
Replies
48
Views
6K
Knappster
Knappster
Back
Top