JtD88
Member
- Posts
- 18
- Location
- Darlington
Hi, has anyone tried to carry a roof tent and a canoe? I've thrown together this idea to accommodate both safely and without damaging either. Constructive criticism is appreciated!
Aim
Getting the roof tent and canoe secured. Modify roof rack to accommodate both.
Math/Method
Image 2/3 - Establish the tent depth and the racking depth to see how flush the tent will sit allowing canoe to sit lower and be supported on the rack. If tent is not flush, fabricate two mounts front and back to raise canoe so its strapped to the rack and not damaging the tent.
Aim
Getting the roof tent and canoe secured. Modify roof rack to accommodate both.
Math/Method
- Measure the depth of the tent against the depth given from the rack
- Modify side of the rack so tent would sit into the rack and open without obstruction (Cutting the rails off one side allowing it to fold out)
- Fit points front and back of the rack for canoe to be secure and lay flush across the top of the tent (Raised mounts if needed to lift canoe height above the tent)
Image 2/3 - Establish the tent depth and the racking depth to see how flush the tent will sit allowing canoe to sit lower and be supported on the rack. If tent is not flush, fabricate two mounts front and back to raise canoe so its strapped to the rack and not damaging the tent.