ming
SPACE TWOT
- Posts
- 11,977
- Location
- PLANIT ZOG
ER. . . .is it possible to drain the oil in the ird box ,without dissmatlin the friggin fing, or is it top up only. . . . .
gulp
gulp
Ming Needs Yer Help Agin
- Thread starter ming
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,309
- Location
- Embasinga stocæ
int yo gorra Rave?
ming
SPACE TWOT
- Posts
- 11,977
- Location
- PLANIT ZOG
lent it out un still waitin its return . . . . .un un wented to do it today , then got distracted , un ended up doin nuffink
ming
SPACE TWOT
- Posts
- 11,977
- Location
- PLANIT ZOG
reet. . .update ,just found it ,silly me eyes done it before ,but could not remember ,so the ird can be drained but the rear diff [final drive] can only be topped up. . . . .my next two jobs
- Posts
- 83,309
- Location
- Embasinga stocæ
ming
SPACE TWOT
- Posts
- 11,977
- Location
- PLANIT ZOG
Thanks Flops
Shutty
New Member
- Posts
- 282
- Location
- Thirsk, North Yorkshire
remember to undo filler first to make sure it el come of
Northern Irelander
Well-Known Member
- Posts
- 2,890
- Location
- N. Ireland
It may take longer than you think:
http://www.landyzone.co.uk/lz/f9/ird-oil-level-plug-42994.html?highlight=ird+level+plug
http://www.landyzone.co.uk/lz/f9/ird-oil-level-plug-42994.html?highlight=ird+level+plug
ming
SPACE TWOT
- Posts
- 11,977
- Location
- PLANIT ZOG
see why they say ,undo level first. . .
Shutty
New Member
- Posts
- 282
- Location
- Thirsk, North Yorkshire
12" long extension and a 18" breaker bar and a 19mm 6 point socket
Lay behind osf wheel and tug
Tight but should move
You might need to jack it up first to loosen nut as the breaker bar will flex and touch floor before it grabs nut
Lay behind osf wheel and tug
Tight but should move
You might need to jack it up first to loosen nut as the breaker bar will flex and touch floor before it grabs nut
