manual transmission not selecting gears when idle

Corne215 · Tuesday at 10:23

Hi guys
My gearbox run without oil my bad, so it packed up.
Got new one R380 gearbox put new clutch new fork and everything so i fit the new gearbox put everything back but now it does not want to select gear when idling, its select's when the motor is off or when trance Ver case is in neutral.
if the disco is off and u put it in gear and press the clutch in the Landy jumps forward
I removed the gearbox again to check if i did something wrong but did not see anything wrong can it be that my clutch is
can anyone please help
I have a video i can send to someone that can provide me with a cell number

Eldon · Tuesday at 10:37

Clutch drag, check and adjust to suit assuming you've assembled the clutch correctly using the right parts.

In effect your clutch isn't fully clearing when operated.

Corne215 · Tuesday at 12:55

Eldon said:
Clutch drag, check and adjust to suit assuming you've assembled the clutch correctly using the right parts.

In effect your clutch isn't fully clearing when operate

Corne215 · Tuesday at 12:56

Thank you for the reply how would one go to check this

Corne215 · Tuesday at 12:59

How do you check the clutch drag and how do you adjust it?

kermit_rr · Tuesday at 13:16

Eldon said:
Clutch drag, check and adjust to suit assuming you've assembled the clutch correctly using the right parts.

In effect your clutch isn't fully clearing when operated.

Or it's not been put together correctly

Corne215 · Tuesday at 13:41

kermit_rr said:
Or it's not been put together correctly

I'm working with the manual and I followed it step by step 1 to 84 to make sure I did every step correctly i took the gearbox out again to make sure but still does the same.

but the clutch feels soft

Corne215 · Tuesday at 13:45

Corne215 said:
I'm working with the manual and I followed it step by step 1 to 84 to make sure I did every step correctly i took the gearbox out again to make sure but still does the same.

but the clutch feels soft

Corne215 · Tuesday at 13:46

Corne215 said:
View attachment 331903 View attachment 331903

this is what I used to remove and put it back together

Eldon · Wednesday at 15:53

How much free play is there at the clutch pedal i.e. pushing fresh air before it appears to be operating something?

You did use the correct fork didn't you?
Post the part numbers of the items used so someone can check or confirm for you?

freelance · Wednesday at 18:29

Clutch plate fitted wrong way, or splines need a little lube so clutch can release

Stanleysteamer · Wednesday at 22:06

Bleed the clutch again?

Corne215 · Thursday at 10:19

Stanleysteamer said:
Bleed the clutch again?

I did bleed the clutch a couple of times but still no luck

Corne215 · Thursday at 10:21

freelance said:
Clutch plate fitted wrong way, or splines need a little lube so clutch can re

No i made sure that the clutch plate was in the right way

miktdish · Thursday at 10:27

Is it an LOF clutch ?

Corne215 · Thursday at 10:40

miktdish said:
Is it an LOF clutch ?

no its a Veleo clutch part number STC8358AP

Corne215 · Thursday at 10:49

Eldon said:
How much free play is there at the clutch pedal i.e. pushing fresh air before it appears to be operating something?

You did use the correct fork didn't you?
Post the part numbers of the items used so someone can check or confirm for you?

clutch kit STC8358AP
Clutch fork FTC2957G
push rod FTC3912
Clutch release bearing FTC5200G

manual transmission not selecting gears when idle

Corne215

Member

Eldon

Member

Corne215

Member

Corne215

Member

Corne215

Member

kermit_rr

Very

Corne215

Member

Corne215

Member

Corne215

Member

Eldon

Member

freelance

Well-Known Member

Stanleysteamer

Well-Known Member

Corne215

Member

Corne215

Member

miktdish

Guns n Chainsaws

Corne215

Member

Corne215

Member

Similar threads