Making Bad Into Good

Hi all - cant find a thread which answers my prob so help please!! Am in the process of respraying my old 90. The panels ive done so far in my garage look ok apart from the large number of bits that have settled on the paint as its been drying. Is it possible to use a v fine abrasive to get these out once the paint has hardened whilst still maintaining a shiny finish? If it helps ive used a 2 pack paint system in black!

thanks steve

very unlikely - if the paint was still tacky, the bits will have "sunk" into the paint. You could try some rubbing compound

RUBBING COMPOUND

should always hang stuff when spraying

sounds like some 1600 wet and dry with a power orbital sander is in order. then some fecking good polish then wax.

you also need to buy some more elbow grease, because you'll get through alot