Landrover Defender 200Tdi - centre dash bolts ??

Hi Everyone !

I’m busy with getting my 1993 90 200Tdi back on the road after 23 years sat in my garage.
Been through a lot of ups and downs (new timing belt, water pump, belts/fluids and filters, starter motor amoungst others), slowly getting there

Anyway the centre dash is hanging out - no screws or bolts - been like it since it was put to bed all those years ago. It holds the cigar lighter / clock / rear wash wipe .

Trouble is that the fixing bolts/screws are lost and I’m not sure what to use to fix it back in place - any suggestions what I should use to hold it back in place ? The clock and cigar lighter still work, but the rear wash wipe is fubar (probably why it was left in that condition).
If anyone knows what I should use to fix it back in to place please let me know, much appreciated thank you !

I used some M5 rivnuts .... I needed to expand the rear wiring cover holes to fit over these so it 'clips' in.
My centre dash is held on with 2 stainless capheads.

Thanks for the information, just ordered the parts… now to work out what’s going on with the rear wash wiper and screen wash… and the broken passenger door lock … it’s always fun being a Landrover owner eh Thanks again for the information