GingerPuss
Active Member
- Posts
- 232
- Location
- Southport
Doesn't look too good for series landys:
Land Rover Defender 88 MOT Results | Honest John
Land Rover Defender 88 MOT Results | Honest John
Land Rover MOT pass rate data
- Thread starter GingerPuss
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
honolulujoe
Well-Known Member
- Posts
- 6,137
- Location
- richmond surrey
had a look round that site, how can you list a proton as a classic 
unless its a classic piece of ****e I suppose
unless its a classic piece of ****e I suppose
Last edited:
darius
Active Member
- Posts
- 254
- Location
- Kidderminster
If I had an 88" Defender I would be worried about who had nicked 2" off my chassis
dominicbeesley
Well-Known Member
- Posts
- 1,701
- Location
- Hebden Bridge, West Yorkshire
Stats look suspect to me why is there a spike around 1971?
RealBeale
Active Member
- Posts
- 533
- Location
- Birmingham
Strange, but when I drive the gauntlet of "little Bangladesh" on my way to work, at least 70% of the cars I encounter have some sort of lighting defect, from no front lights at all to brake lights stuck on and everything in between, and mostly modern cars. Has anyone else noticed how a certain group of people believe they can compensate for having a headlight out by putting the remaining light on full beam ? I wonder how many of these owners have "dodgy" MOT's ?
NEVER TRUST STATISTICS 87% are made up.
NEVER TRUST STATISTICS 87% are made up.
RobertP
Active Member
- Posts
- 320
I heard it was 73%
tom1disco.300
Active Member
- Posts
- 389
- Location
- southwater/horsham westsussex
basicly only 50 percent passed successfully meaning the other half have a good chance of passing too,because the headlights arnt controlled by computers, and the indicators, and brake lights, and the master cylinder dosent cost 700 quid! and also at least 75% of land roves ever made before 1999-2000 are still on the road!!! older motors are better and we all know it! point proven!
tottot
Well-Known Member
- Posts
- 8,028
- Location
- west wales coast
I bet that not many of the other cars still work or play hard for a living like many landy's do, Series 3 and 1990 90 working/playing.
Last edited:
Murtle
Active Member
- Posts
- 267
- Location
- Near Glastonbury
Now I'm 99% sure you'll struggle to find the following on a standard 88" Series?
0.012% fail on Cable
0.012% fail on Subframe mounting
0.023% fail on Constant velocity joints
0.012% fail on Sub-frames
0.058% fail on Panhard rods
0.046% fail on Fluid suspension
0.035% fail on Suspension arms
0.023% fail on Trailing arms
0.023% fail on Radius arms
0.023% fail on Torque / reaction arms
0.012% fail on Coil springs
0.012% fail on Steering rack
What a complete load of tosh
0.012% fail on Cable
0.012% fail on Subframe mounting
0.023% fail on Constant velocity joints
0.012% fail on Sub-frames
0.058% fail on Panhard rods
0.046% fail on Fluid suspension
0.035% fail on Suspension arms
0.023% fail on Trailing arms
0.023% fail on Radius arms
0.023% fail on Torque / reaction arms
0.012% fail on Coil springs
0.012% fail on Steering rack
What a complete load of tosh
Similar threads
