DanBuild
New Member
- Posts
- 5
- Location
- North Wales
Hi All,
I'm new on here, I am building a V8 auto 110 defender on a Galvanized chassis.
The engine and box are from a D2 complete with the full loom, ECU, BCU and various ancillaries.
I have not heard the engine run so I know there are some unknowns here...
I purchased the chassis and engine as a project but although the engine now turns over with the key there is no spark and the pump does not run.
I notice that the tachometer doesn't calibrate on switch on.
The computer when connected says there is earth connection fault on the ECU.
I have connected every earth carefully to the chassis so any advice you have would be helpful.
Thanks in advance.
I'm new on here, I am building a V8 auto 110 defender on a Galvanized chassis.
The engine and box are from a D2 complete with the full loom, ECU, BCU and various ancillaries.
I have not heard the engine run so I know there are some unknowns here...
I purchased the chassis and engine as a project but although the engine now turns over with the key there is no spark and the pump does not run.
I notice that the tachometer doesn't calibrate on switch on.
The computer when connected says there is earth connection fault on the ECU.
I have connected every earth carefully to the chassis so any advice you have would be helpful.
Thanks in advance.
