Land Cruiser Power Steering Hoses

I need to get a fluid pressure hose made for my 82 BJ60 (diesel
wagon). Can anyone tell me how to describe the end fittings to the
supplier? They look like maybe 13mm flare or compression fitting.

I'm installing power steering on a wagon that didn't have it before.
The lines I got with the pump and steering box are rusty and the
return line leaked. I replaced the return line with short pieces of
pipe, new hose, and clamps, but I think the pressure side has too much
pressure for regular hose clamps.

Advice and opinions appreciated.

>I need to get a fluid pressure hose made for my 82 BJ60 (diesel
>wagon). Can anyone tell me how to describe the end fittings to the
>supplier? They look like maybe 13mm flare or compression fitting.
>

I have an 88 fj62, I dont know if it is the same , but I am working on motor
and will look and post what I see on mine later on this evening. I'm replacing
my alternator, 280 bucks from the dealer, 190 for a rebuild , or 60 for a new
regulator. I hate to think what they might want for the hose you need.
MLM