land anchor tow bar alternatives.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Leebastard

Active Member
Posts
504
Location
Luton
Hello chaps,

Now i can't rule ou that i am a complete pleb. but a cannot find a thread on alternatives to the land anchor that is my towbar. my 90 has the standard tow bar and it grounds out all the flamin time. i don't tow anything and have very little experience rescuing stuck vehicles. i was wondering if there is a good alternative to the tow bar. both for recovery and being recovered. i know jate rings and shackles are options but was wondering if they would limit my ability to recover others.
thanks chaps
 
Look at the terrafirma receiver hitches. Leaves a 2" box hole with a removable tovar plate which can utilised for other things too. It keeps it up out the way if you wanna do a bit of off reading too. I'm thinking of changing my Dixon bate to one of these.
 
Look at the terrafirma receiver hitches. Leaves a 2" box hole with a removable tovar plate which can utilised for other things too. It keeps it up out the way if you wanna do a bit of off reading too. I'm thinking of changing my Dixon bate to one of these.

there ok but they need rubber bungs as they fill up with **** and corrode,
boss got 1 on his disco few years back and swapped it back to dixon bate,

rekon there best on chelsea tratters not mud buses..
 
there ok but they need rubber bungs as they fill up with **** and corrode,
boss got 1 on his disco few years back and swapped it back to dixon bate,

rekon there best on chelsea tratters not mud buses..

Mine doesn't ... and I do use it in mud .. a lot!! ;)

002.jpg


004.jpg


P040609_1511.jpg


7240691678_f334ac9043_k_zps19effa49.jpg


7240787878_52c5f5b0a6_k_zps2232db90.jpg
 
Look at the terrafirma receiver hitches. Leaves a 2" box hole with a removable tovar plate which can utilised for other things too. It keeps it up out the way if you wanna do a bit of off reading too. I'm thinking of changing my Dixon bate to one of these.

I welded one of these into my cross member. Seems good so far, and there are a number of different attachments for it. drop plate for tow bar, recovery shackle, winch.

But it could fill up with mud so will need cleaning out now and then, or use the plug as suggested.
 
I welded one of these into my cross member. Seems good so far, and there are a number of different attachments for it. drop plate for tow bar, recovery shackle, winch.

But it could fill up with mud so will need cleaning out now and then, or use the plug as suggested.

Or get a decent solid/capped one that doesn't need a plug .. ;)

Can't recall who made it but it only cost £75 new off ebay, including the towing drop plate. Made the recovery shackle bit myself, with the help of my bro.
 
I used a couple of jate rings at the back and it did for what I needed when off road. Cheap, easy to fit and no cleaning required. Like everything its how much you need it compared to money and effort.
 
Or get a decent solid/capped one that doesn't need a plug .. ;)

Can't recall who made it but it only cost £75 new off ebay, including the towing drop plate. Made the recovery shackle bit myself, with the help of my bro.

Yeah that's the best bet, I welded a steel plate over one end to cap it off, and use a warn 2" receiver plug in the other end.
 
ya cant rob pikey caravans without a towball...:D
robbing pikey caravans? bugga i forgot i put me location as luton. it's a vicious rumour i tells ya!

thanks for all the suggestions gents. i quite like the look of the interchangable jobbie. another present to myself is in order i think!
 
Back
Top